a5:troubleshooting
This is an old revision of the document!
Table of Contents
Troubleshooting & Spare Parts
A5 Specific Troubleshooting
General Troubleshooting
Maintenance
Side Connector Wiring Diagram (click to enlarge)
Still stuck?
If you're still having problems, come and join us in the JGAurora forum, or on facebook, and we can give you some help. Otherwise, you may want to contact JGAurora for help.
Spare Parts
- Broken Bowden Coupler? It is hard to find a replacement, but the fitting is a 4mm pneumatic coupling, with an M8 screw fitting, but with a 1.0mm fine thread. A 1.25mm thread WILL NOT WORK. Please note that there are fittings with the correct thread and diameter on ebay, but some of these have a hex hole. This printer requires a circular 4mm through hole all the way through the coupler. E.g. this item has come with a hex hole for some customers, and requires modificaiton to work on the A5: unsuitable bowden coupler
a5/troubleshooting.1522635486.txt.gz ยท Last modified: 2020/12/25 02:13 (external edit)