a5:mesh-bed-levelling-routine
Differences
This shows you the differences between two versions of the page.
Both sides previous revisionPrevious revisionNext revision | Previous revisionNext revisionBoth sides next revision | ||
a5:mesh-bed-levelling-routine [2018/04/23 22:37] โ samuelpinches | a5:mesh-bed-levelling-routine [2018/11/04 03:53] โ samuelpinches | ||
---|---|---|---|
Line 14: | Line 14: | ||
Next, perform the following steps: | Next, perform the following steps: | ||
- | - Download and install [[https:// | + | - Download and install [[https:// |
- Open pronterface, | - Open pronterface, | ||
- Connect to the printer using baud-rate 250000, and using the correct Serial/COM port for your printer. | - Connect to the printer using baud-rate 250000, and using the correct Serial/COM port for your printer. | ||
Line 57: | Line 57: | ||
If you want to check the mesh that you have produced, you can use the command "G29 S0" to print a mesh report to the command line history window. | If you want to check the mesh that you have produced, you can use the command "G29 S0" to print a mesh report to the command line history window. | ||
+ | |||
+ | |||
+ | ====Mesh Bed Levelling via LCD==== | ||
+ | If you have installed both the custom motherboard firmware and the custom LCD firmware, then you can perform mesh bed levelling via the LCD screen. Note, that the LCD screen is very sensitive, so be careful to avoid causing double taps! | ||
+ | - Go the more menu. | ||
+ | - Press "mesh bed levelling" | ||
+ | - Use the "mesh up and down" buttons until the desired gap is correct. | ||
+ | - Press the "next point" button to go the next point. | ||
+ | - Repeat this until all the points have been levelled. | ||
+ | - After the last point is completed, when you press the "next point" button, the head will return to the home position. | ||
+ | - Press the "Save EEPROM" | ||
+ | - Don't forget to add M420 S1 to your [[: | ||
+ | |||
==== More Info ==== | ==== More Info ==== | ||
For more information on the mesh bed levelling process and options, please see the [[http:// | For more information on the mesh bed levelling process and options, please see the [[http:// |
a5/mesh-bed-levelling-routine.txt ยท Last modified: 2020/12/25 02:13 by 127.0.0.1