Differences

This shows you the differences between two versions of the page.

--- z-603s:firmware [2018/02/17 00:40] – [Download Firmware] pinchies
+++ z-603s:firmware [2019/04/20 01:31] – samuelpinches
@@ Line 1: / Line 1: @@
 ====== Firmware for the JGAurora Z-603S ======
-This printer had a motherboard change mid way in 2016, so there are at least TWO different motherboards. [[https://www.dropbox.com/sh/hqqt0l9wrv0eeuv/AADjnpCTAiwed3oHgv8JznIva?dl=0|Click here to see some photos of these motherboards.]] Of the two versions that are known to exist, I am referring to the older one as "motherboard A", and the newer one as "motherboard B".
+This printer had a motherboard change mid way in 2016, so there are at least TWO different motherboards. [[https://www.dropbox.com/sh/hqqt0l9wrv0eeuv/AADjnpCTAiwed3oHgv8JznIva?dl=0|Click here to see some photos of these motherboards.]] Of the two versions that are known to exist, I am referring to the one as "motherboard A", and the other as "motherboard B". Type A has separate heat sinks over the stepper drivers, type B has one long continuous heat sink.
 ==== Download Firmware ====
-Please **click the photo below that matches your motherboard** to download the correct firmware for your Z-603S. '
+Please **click the photo below that matches your motherboard** to download the correct firmware for your Z-603S.
 Each link contains both the **OEM factory firmware**, and the **custom community firmware** for these printers.
@@ Line 11: / Line 10: @@
 [[https://www.dropbox.com/sh/xkhbxgnvnn91mcc/AADs2cOb5XKs6mwnyMr0wrAua?dl=0|{{:z-603s:z603s-motherboard-a.jpg?400|}}]][[https://www.dropbox.com/sh/ifvlkj5rreqx0oh/AAAy24vSeReJiFYTXP0LUdZna?dl=0|{{:z-603s:z603s-motherboard-b.jpg?400|}}]]
+**PLEASE NOTE: the type A can come in green as well. Mine was an older one, which was why it was blue.**
@@ Line 29: / Line 30: @@
   - In the Arduino software, choose upload, under the sketch menu.
   - Wait for the firmware to finish uploading.
+  - Celebrate! You did it! 8-)
+==== Install Factory Firmware ====
+For Mac: Download [[http://paulkaplan.me/HexUploader/|HexUploader]]
+For PC: Download [[http://www.hobbytronics.co.uk/arduino-xloader|XLoader]]
+  - Plug in printer via USB
+  - Install FTDI drivers, if neccesary.
+  - Open flashing program, and select HEX file.
+  - Choose COM/serial port that matches your printer
+  - Choose "Upload"
+  - Wait! Don't touch anything!
   - Celebrate! You did it! 8-)

The Unofficial JGMaker (& JGAurora) Wiki

User Tools

Site Tools

Differences