not-heating
Differences
This shows you the differences between two versions of the page.
| Both sides previous revisionPrevious revisionNext revision | Previous revisionLast revisionBoth sides next revision | ||
| not-heating [2019/02/18 20:52] – samuelpinches | not-heating [2020/04/13 16:20] – samuelpinches | ||
|---|---|---|---|
| Line 3: | Line 3: | ||
| ==== 1. Check the temperature on the LCD ==== | ==== 1. Check the temperature on the LCD ==== | ||
| - | If the LCD temperature is -15C for either the bed or nozzle, then either the connection going from the sensor to the motherboard is broken, or the sensor itself is broken. Check all the connections are plugged in FIRMLY! Examine the connector plugs also, check that no wires are loose or coming out of the connectors. If the LCD temperature shown is 0C, then there may be a temperature sensor connection problem, or, there may be a communication problem between the LCD and the main motherboard, | + | If the LCD temperature is -15C for either the bed or nozzle, then either the connection going from the sensor to the motherboard is broken, or the sensor itself is broken. Check all the connections are plugged in FIRMLY! Examine the connector plugs also, check that no wires are loose or coming out of the connectors. If the LCD temperature shown is 0C, then there may be a temperature sensor connection problem, or, there may be a communication problem between the LCD and the main motherboard, |
| ==== 2. Check for error messages while heating via Pronterface ==== | ==== 2. Check for error messages while heating via Pronterface ==== | ||
| Line 26: | Line 26: | ||
| A video tutorial on replacing the Hot-End Thermistor can be found [[https:// | A video tutorial on replacing the Hot-End Thermistor can be found [[https:// | ||
| + | |||
| + | ==== 4. Check your bed connector is not burned ==== | ||
| + | [[burned-bed-connectors|See this article]] | ||
| ==== Further Troubleshooting ==== | ==== Further Troubleshooting ==== | ||
not-heating.txt · Last modified: 2020/12/25 02:13 by 127.0.0.1
