Differences

This shows you the differences between two versions of the page.

--- lubrication [2019/02/08 14:32] – samuelpinches
+++ lubrication [2019/02/08 14:33] – samuelpinches
@@ Line 4: / Line 4: @@
 There are many lubricant options on the market, and most options will work fine. However the best lubricant options are discussed below.
-Before applying a lubricant, it is best to wipe the surfaces to remove dirt, debris and old grease.
+Before applying a lubricant, it is best to wipe the surfaces (or flush the bearings) with solvent or cleaner, to remove dirt, debris and old grease.
 === Sewing machine oil ===
@@ Line 12: / Line 12: @@
 === Silicone Grease ===
-**Ok for all X, Y, Z axis.**
+**Mostly ok for X, Y, good for Z axis.**
 There are many lubricants out there that are silicone based. These are generally designed for water-resistant applications, and are not optimal for 3D printers. Depending on the formulation this may be a little more “thick” or “tacky” than is required in a 3D printer for x and y axis, but can be a good choice for a z axis as a thicker grease will avoid the lubricant simply dripping down vertical shafts. However, silicone greases can cause increased wear in metal bearings, especially if it is too thick. Silicone grease is good for use on plastic gears.

The Unofficial JGMaker (& JGAurora) Wiki