a5:silent-stepper-driver-tmc2130
Differences
This shows you the differences between two versions of the page.
| Both sides previous revisionPrevious revision | Next revisionBoth sides next revision | ||
| a5:silent-stepper-driver-tmc2130 [2018/11/05 00:37] – red_m | a5:silent-stepper-driver-tmc2130 [2018/11/05 00:39] – [Check The Proper Function] red_m | ||
|---|---|---|---|
| Line 201: | Line 201: | ||
| - Insert mains plug. | - Insert mains plug. | ||
| - Power on the printer | - Power on the printer | ||
| - | - Use the Touch Display (Move) and check that the X and Y axes are moving in the right direction. | + | - Use the Touch Display (Move) |
| Make sure your X and Y (and Z if you also have the extra driver installed and wired) are going to correct way otherwise you'll need to make sure you did all the changes to the firmware. | Make sure your X and Y (and Z if you also have the extra driver installed and wired) are going to correct way otherwise you'll need to make sure you did all the changes to the firmware. | ||
a5/silent-stepper-driver-tmc2130.txt · Last modified: 2020/12/25 02:13 by 127.0.0.1
