a5:remove-fan-pwm-noise
This is an old revision of the document!
Table of Contents
UNDER CONSTRUCTION
Remove Fan PWM Noise
Author: AETEK
The changes shown here require knowledge in the field of electrical engineering and can overwhelm normal users. Also, I would like to point out possible dangers that exist in certain interventions. All adjustments have been checked for function.
Difficulty: Advanced
What is this about?
Required Electrical Parts
- 1 x Diode 1N 4007
- 1 x Resistor 100 Ohms 3 Watts
- 1 x electrolytic capacitor 220uF 35V
- Optional 2-Pin plug and socket for building an plug-in-adapter
- Some cable and heat shrink
The hobbyist will most likely have the parts in the tinker box.
Build The Circuit
The female pin header is connected to the MKS GEN_L 1.0 mainboard.
The plug belongs to . See photos. Please note the polarity
a5/remove-fan-pwm-noise.1530801138.txt.gz ยท Last modified: 2020/12/25 02:13 (external edit)