Differences

This shows you the differences between two versions of the page.

--- a5:reduce-power-supply-noise [2018/07/06 19:03] – aeket
+++ a5:reduce-power-supply-noise [2018/07/06 19:36] – [Build The Circuit] aeket
@@ Line 15: / Line 15: @@
 **Required Electrical Parts**
-  * 1 x Zener diode **xxV 1.3W**
+  * 1 x Zener diode **5.1V 1.3W**
+==== Build The Circuit ====
+  - Pull out the A5 mains plug.
+  - Remove the cover of the power supply.
+  - Install the Zener diode (observe polarity)
+  - Check function with a 12V power supply.
+  - Reconnect the fan plug in the A5 power supply.
+  - Screw the power supply cover back on.
+  - Assemble the A5.
+  - That's all.
-==== Build The Circuit =====
+{{:a5:aetek:silent_ps_01.jpg}}
-{{:a5:aetek:dummy.jpg}}
+{{:a5:aetek:silent_ps_02.jpg}}
+{{:a5:aetek:silent_ps_03.jpg}}
+{{:a5:aetek:silent_ps_04.jpg}}
+{{:a5:aetek:silent_ps_05.jpg}}
+\\
+\\
+\\
+==== Final Test Using 12V Power Supply ====
+{{:a5:aetek:silent_ps_06.jpg}}
+{{:a5:aetek:silent_ps_07.jpg}}
+{{:a5:aetek:silent_ps_08.jpg}}
+==== Check if it works reliably  ====
-=== Do the first test ===
-For this test, the A5 does not need to be assembled. It can stay open.\\

The Unofficial JGMaker (& JGAurora) Wiki