This is an old revision of the document!
Printing Profiles
JGCreat / Cura
JGCreat is a rebadged version of an old copy of Cura. You can setup a current version of Cura by selecting the βcustom machineβ option, and entering the following settings, as seen here.
The default printing material settings in Cura can be reasonably successful when used on the A5, but you may want to increase the retraction settings to around 6mm.
More material printing profiles can be downloaded here. Source: Charles Eakins @ https://github.com/ceakins/3d-Printer-Profiles/tree/master/cura
IdeaMaker
You can setup IdeaMaker with the A5 printer, by using these machine settings here. More printing settings can be downloaded here. Source: Charles Eakins @ https://github.com/ceakins/3d-Printer-Profiles/tree/master/ideaMaker