z-603s

This is an old revision of the document!


JGAurora Z-603S 3D printer

Where to buy:

Amazon is strongly recommended - they have the best customer service, the most careful delivery service and the best return policy. However, the cheapest store is typically GearBest or Banggood, and by paying with PayPal you still have some recourse if things go wrong.

About the printer

The JGAurora Z-603S was one of the first printers that you could buy that worked well quite out of the box, with only very minimal assembly required. It has excellent print quality, and is a very reliable printer.

Released in 2014, while not a recently launched model, the printer is still good value, and the frame is very rigid. It is a good competitor to options like the genuine Prusa i3, and the FolgerTech FT5 - and you can be printing out of the box quite easily and quickly, as it comes preassembled. If you like a kit printer approach, the FT5 is possibly a better printer overall for around the same price, with the advantage that by assembling the printer yourself, you can become more familiar with the inner workings of the printer. Compared with the pre-assembled Prusa i3 the Z-603S is cheaper, but lacks many of the Prusa's clever features, like the removable bed, or auto bed levelling probe.

The Z-603S has its origins in JGAurora's 2nd generation product, the Z-603, but with significant improvements in every area. JGAurora has also made several revisions to the product since its release. In particular, early models came with poor wiring, and a half-finished motherboard design, but JGAurora significantly improved the quality of the wiring and motherboard in the second major revision.

The printer has several good attributes:

  • Excellent print quality
  • Great large print volume
  • Strong stable metal frame
  • Excellent quality MeanWell power supply
  • Excellent OMRON brand opto-switches for endstops - precise and very repeatable.
  • LED under hotend
  • (newest revision only, 2016+) Good quality motherboard
  • (newest revision only, 2016+) Good high quality cabling

The printer has several bad attributes:

  • No source code provided for Marlin Open Source GPL firmware!
  • No auto bed-levelling probe
  • Warped beds are common in the early models at least.
  • Poor cable management, no drag chains.
  • Poor strain relief at print head, prone to fatigue failure at print head over time.
  • Frustrating print head design makes it very tedious to clean extruder gear, or to insert new filament (unguided filament path).
  • Not easy to service. Many things hidden away, and many screws.
  • Poor blower fan duct

Versions

The Z-603S has come in at least two models. The first model had a blue JGAurora motherboard marked โ€œerwoโ€ and cheap quality wiring. The 2nd edition of this printer featured significantly better quality wiring, and came with a new green JGAurora motherboard. Photos of the motherboards can be seen here. Apart from the higher quality of the green motherboard, there are some pinout changes on the board making the firmware incompatible between the two. Also, there was a change in the stepper drivers from the THB6128 to the THB7128 (by Sanyo) with substantially improved cooling with the addition of a very nice large heatsink!

Assembly & Setup Tips

  • Inspect the printer thoroughly before use. Check all the screws you can access are tight, and that the axis all move smoothly.

Reviews

There are only a few independant video reviews on youtube for the Z-603S:

Manual

Custom Firmware

  • Smoother printer movement for better surface printing quality
  • Faster and more accurate homing procedure
  • Much better calibration of extruder motor for more accurate filament delivery
  • Fewer bugs because of latest version of Marlin software (no more random printer resets in the middle of a print!)
  • Full source code to enable mods and enhancements

Modifications & Upgrades

Troubleshooting

Z-603S Specific Troubleshooting

General Troubleshooting

Maintenance

z-603s.1524311629.txt.gz ยท Last modified: 2020/12/25 02:13 (external edit)