z-603s:bed-levelling

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision
Previous revision
z-603s:bed-levelling [2018/02/08 01:46] โ€“ pinchiesz-603s:bed-levelling [2020/12/25 02:13] (current) โ€“ external edit 127.0.0.1
Line 6: Line 6:
   - Put up with it, and use the flattest region on the bed you can find - giving up on any hope of printing large prints   - Put up with it, and use the flattest region on the bed you can find - giving up on any hope of printing large prints
   - Buy a new perfectly flat [[z-603s:cast-aluminium-print-bed|custom cast aluminium print bed]]   - Buy a new perfectly flat [[z-603s:cast-aluminium-print-bed|custom cast aluminium print bed]]
-  - Install a [[z-603s:firmware|custom firmware]] on your printer, and go through the [[z603-s:mesh bed levelling routine]] to compensate for the uneven surface.+  - Install a [[z-603s:firmware|custom firmware]] on your printer, and go through the [[z-603s:mesh bed levelling routine]] to compensate for the uneven surface.
   - Modify your printer with an [[z-603s:bed-levelling-probe|automatic bed levelling probe]].   - Modify your printer with an [[z-603s:bed-levelling-probe|automatic bed levelling probe]].
  
z-603s/bed-levelling.1518014797.txt.gz ยท Last modified: 2020/12/25 02:13 (external edit)