| |
| essentials [2018/11/19 15:47] – samuelpinches | essentials [2020/12/25 02:13] (current) – external edit 127.0.0.1 |
|---|
| |[[https://www.gearbest.com/other-accessories/pp_009563464914.html?wid=1433363&lkid=15337319|{{::buygearbest.png?180}}]][[https://www.banggood.com/TMC2208-Stepping-Motor-Mute-Built-in-Driver-Replace-TMC2100-For-3D-Printer-p-1243870.html?utm_campaign=481891_facebook&utm_content=1087&p=!P11034818912014032C|{{::buybanggood.png?180}}]][[https://amzn.to/2Fuxbda|{{::buyamazon.png?180}}]]|No image yet.|**TMC Stepper Drivers TMC2208**:TMC2208| | |[[https://www.gearbest.com/other-accessories/pp_009563464914.html?wid=1433363&lkid=15337319|{{::buygearbest.png?180}}]][[https://www.banggood.com/TMC2208-Stepping-Motor-Mute-Built-in-Driver-Replace-TMC2100-For-3D-Printer-p-1243870.html?utm_campaign=481891_facebook&utm_content=1087&p=!P11034818912014032C|{{::buybanggood.png?180}}]][[https://amzn.to/2Fuxbda|{{::buyamazon.png?180}}]]|No image yet.|**TMC Stepper Drivers TMC2208**:TMC2208| |
| |[[https://www.banggood.com/BIQU-4PCS-New-TL-Smoother-V1_0-Addon-Module-For-3D-pinter-Motor-Drivers-p-1272685.html?utm_campaign=481891_facebook&utm_content=1087&p=!P11034818912014032C|{{::buybanggood.png?180}}]][[https://amzn.to/2MVxrkB|{{::buyamazon.png?180}}]]|No image yet.|**TL-Smoothers**:A4988 and DRV8828 stepper drivers can product "salmon skin" surface defects. These smoothers significantly reduce these artifacts.| | |[[https://www.banggood.com/BIQU-4PCS-New-TL-Smoother-V1_0-Addon-Module-For-3D-pinter-Motor-Drivers-p-1272685.html?utm_campaign=481891_facebook&utm_content=1087&p=!P11034818912014032C|{{::buybanggood.png?180}}]][[https://amzn.to/2MVxrkB|{{::buyamazon.png?180}}]]|No image yet.|**TL-Smoothers**:A4988 and DRV8828 stepper drivers can product "salmon skin" surface defects. These smoothers significantly reduce these artifacts.| |
| | | [[https://sampin.ch/A5-bearing-set|{{::buyaliexpress.png?180}}]]| {{::bearings.jpg?nolink&240|}} | **Replacement Bearings for X & Y Axis**: The bearings that come with the A5 are of very low quality. Here is a high quality replacement set I organised from a trusted seller on Aliexpress. They are not cheap, but these are premium quality bearings, and they don't normally deal with such low quantities.| |
| |[[https://amzn.to/2NLMxtB|{{::buyamazon.png?180}}]]|No image yet.|**Buildtak Clone for JGAurora A5 (300mm square)**:If you're having a hard time with [[a5:bed-adhesion|bed adhesion]], then you might want to try applying a buildtak-like surface to the glass bed instead.| | |[[https://amzn.to/2NLMxtB|{{::buyamazon.png?180}}]]|No image yet.|**Buildtak Clone for JGAurora A5 (300mm square)**:If you're having a hard time with [[a5:bed-adhesion|bed adhesion]], then you might want to try applying a buildtak-like surface to the glass bed instead.| |
| |[[https://www.gearbest.com/3d-printer-parts/pp_540285.html?lkid=14854617|{{::buygearbest.png?180}}]][[https://www.banggood.com/24V-DC-0_1A-50mm50mm15mm-Blow-Radial-Cooling-Fan-For-3D-Printer-p-1206765.html?utm_campaign=481891_facebook&utm_content=1087&p=!P11034818912014032C|{{::buybanggood.png?180}}]][[https://amzn.to/2wdhU8H|{{::buyamazon.png?180}}]]|No image yet.|**24V Blower Cooling Fan**:Need more cooling? Here's 24V of gale-force wind.... well, at least compared to the stock fans. You can [[https://www.thingiverse.com/thing:2977464|print a new X-mounting system to use this cooler]], and on some A5 printers there are even [[https://jgaurorawiki.com/_media/internalfan.jpg|mounting posts inside the chassis if you want to use this fan to cool down your stepper drivers]]. | | |[[https://www.gearbest.com/3d-printer-parts/pp_540285.html?lkid=14854617|{{::buygearbest.png?180}}]][[https://www.banggood.com/24V-DC-0_1A-50mm50mm15mm-Blow-Radial-Cooling-Fan-For-3D-Printer-p-1206765.html?utm_campaign=481891_facebook&utm_content=1087&p=!P11034818912014032C|{{::buybanggood.png?180}}]][[https://amzn.to/2wdhU8H|{{::buyamazon.png?180}}]]|No image yet.|**24V Blower Cooling Fan**:Need more cooling? Here's 24V of gale-force wind.... well, at least compared to the stock fans. You can [[https://www.thingiverse.com/thing:2977464|print a new X-mounting system to use this cooler]], and on some A5 printers there are even [[https://jgaurorawiki.com/_media/internalfan.jpg|mounting posts inside the chassis if you want to use this fan to cool down your stepper drivers]]. | |
| ====== Spare Parts ====== | ====== Spare Parts ====== |
| {{tablelayout?colwidth="180px,180px,-"}} | {{tablelayout?colwidth="180px,180px,-"}} |
| ^ Item ^ Image ^ Description ^ | ^ Item ^ Image ^ Description ^ |
| | [[https://sams-3d-printer-parts.myshopify.com/cart/12979160875075:1?channel=buy_button|BUY from Sam's Store (shipping from Hong Kong)]] -OR- [[https://www.amazon.com/gp/product/B07GPNCPZ8/ref=as_li_tl?ie=UTF8&camp=1789&creative=9325&creativeASIN=B07GPNCPZ8&linkCode=as2&tag=samuelpinches-20&linkId=f96f2a2141258b73224c16d635f08de4|BUY from Sam via Amazon in USA]] | {{::a5:bowden.jpg?nolink&240|}} | **Spare Bowden Connector for JGAurora A5 & A3S**: This is the rather fragile connector that holds the PTFE tubing to the extruder and the hot end. The thread is very rare, so I have actually decided to try to sell these myself! This is a pack of 3, whipping world wide. I will be selling these on amazon in the next two weeks. Limited stock - once they are sold out, I may not restock them. This is just an experiment. | | | [[https://s.click.aliexpress.com/e/5lZZvTcy|{{::buyaliexpress.png?180}}]] | {{::a5:bowden-connector-pack.jpg?240&nolink}} | **Spare Bowden Connectors for JGAurora A5, A5X, A5S & A3S**: This is the rather fragile connector that holds the PTFE tubing to the extruder and the hot end. <del>The thread is very rare, so I have actually decided to try to sell these myself! This is a pack of 3 connectors. There are options to buy on amazon USA, from my store in hong kong, or from my store in australia. Limited stock - once they are sold out, I may not restock them. This is just an experiment.</del> My store is sold out - you need to buy these from JGAurora now. | |
| | [[http://s.click.aliexpress.com/e/IMwYV5e|{{::buyaliexpress.png?180}}]][[https://amzn.to/2wbeX8I|{{::buyamazon.png?180}}]] | No image yet. | **Replacement Diamond Heated Bed for JGAurora A5**:If your heated bed is damaged, you can purchase a replacement here. | | | [[https://sampin.ch/A5-bearing-set|{{::buyaliexpress.png?180}}]] | {{::bearings.jpg?240&nolink}} | **Replacement Bearings for X & Y Axis**: The bearings that come with the A5 are of very low quality. Here is a high quality replacement set I organised from a trusted seller on Aliexpress. They are not cheap, but these are premium quality bearings, and they don't normally deal with such low quantities. | |
| | [[https://www.gearbest.com/3d-printer-parts/pp_1357525.html?lkid=14884857|{{::buygearbest.png?180}}]][[http://s.click.aliexpress.com/e/bXQqiPB2|{{::buyaliexpress.png?180}}]][[https://amzn.to/2L6Whwl|{{::buyamazon.png?180}}]] | No image yet. | **Main Motherboard**:Replacement Main Motherboard (MKS Gen L) - good to buy if your [[a5:faulty-temperature-readings|thermistor inputs are damaged. Aliexpress is cheapest!]]. | | | [[http://s.click.aliexpress.com/e/IMwYV5e|{{::buyaliexpress.png?180}}]][[https://amzn.to/2wbeX8I|{{::buyamazon.png?180}}]] | No image yet. | **Replacement Diamond Heated Bed for JGAurora A5**:If your heated bed is damaged, you can purchase a replacement here. | |
| | [[https://www.banggood.com/2_8-Inch-MKS-TFT28-V1_2-Full-Color-Touch-Screen-Support-WIFI-APP-For-3D-Printer-RepRap-p-1092608.html?p=!P11034818912014032C|{{::buybanggood.png?180}}]][[http://s.click.aliexpress.com/e/nv7m2vK|{{::buyaliexpress.png?180}}]][[https://www.amazon.com/gp/product/B07589F8JN/ref=as_li_qf_asin_il_tl?ie=UTF8&tag=samuelpinches-20&creative=9325&linkCode=as2&creativeASIN=B07589F8JN&linkId=b1f2c9ff6db8cbddf6a7f069cf8cfa29|{{::buyamazon.png?180}}]] | No image yet. | **LCD Module**:Replacement LCD Module (MKS TFT28) - good to buy if your LCD screen is not working, or if you damaged the connectors on the back. Aliexpress is cheapest! | | | [[https://www.gearbest.com/3d-printer-parts/pp_1357525.html?lkid=14884857|{{::buygearbest.png?180}}]][[http://s.click.aliexpress.com/e/bXQqiPB2|{{::buyaliexpress.png?180}}]][[https://amzn.to/2L6Whwl|{{::buyamazon.png?180}}]] | No image yet. | **Main Motherboard**:Replacement Main Motherboard (MKS Gen L) - good to buy if your [[a5:faulty-temperature-readings|thermistor inputs are damaged. Aliexpress is cheapest!]]. | |
| | [[https://sampin.ch/A5-bearings|{{::buyaliexpress.png?180}}]]| No image yet. | **Replacement Bearings for X & Y Axis**: The bearings that come with the A5 are of very low quality. Here is a high quality replacement set. They are not cheap, but these are premium quality bearings, and they don't normally deal with such low quantities.| | | [[https://www.banggood.com/2_8-Inch-MKS-TFT28-V1_2-Full-Color-Touch-Screen-Support-WIFI-APP-For-3D-Printer-RepRap-p-1092608.html?p=!P11034818912014032C|{{::buybanggood.png?180}}]][[http://s.click.aliexpress.com/e/nv7m2vK|{{::buyaliexpress.png?180}}]][[https://www.amazon.com/gp/product/B07589F8JN/ref=as_li_qf_asin_il_tl?ie=UTF8&tag=samuelpinches-20&creative=9325&linkCode=as2&creativeASIN=B07589F8JN&linkId=b1f2c9ff6db8cbddf6a7f069cf8cfa29|{{::buyamazon.png?180}}]] | No image yet. | **LCD Module**:Replacement LCD Module (MKS TFT28) - good to buy if your LCD screen is not working, or if you damaged the connectors on the back. Aliexpress is cheapest! | |
| | [[https://www.gearbest.com/3d-printer-parts/pp_269005.html?lkid=14854875|{{::buygearbest.png?180}}]][[https://www.banggood.com/2-Pcs-Flexible-Coupler-5-x-8-mm-For-3D-Printer-Z-Axis-p-1070442.html?utm_campaign=481891_facebook&utm_content=1087&p=!P11034818912014032C|{{::buybanggood.png?180}}]][[https://amzn.to/2nNRTJb|{{::buyamazon.png?180}}]] | No image yet. | **Motor Coupler**: Many A5 & A3S have arrived with stretched motor couplers... here's a suitable replacement you can order if you need to. | | | [[https://www.gearbest.com/3d-printer-parts/pp_269005.html?lkid=14854875|{{::buygearbest.png?180}}]][[https://www.banggood.com/2-Pcs-Flexible-Coupler-5-x-8-mm-For-3D-Printer-Z-Axis-p-1070442.html?utm_campaign=481891_facebook&utm_content=1087&p=!P11034818912014032C|{{::buybanggood.png?180}}]][[https://amzn.to/2nNRTJb|{{::buyamazon.png?180}}]] | No image yet. | **Motor Coupler**: Many A5 & A3S have arrived with stretched motor couplers... here's a suitable replacement you can order if you need to. | |
| | [[https://www.banggood.com/JGAURORA-Temperature-Detece-Suite-Thermistor-with-Wire-For-3D-Printer-p-1278523.html?utm_campaign=481891_facebook&utm_content=1087&p=!P11034818912014032C|{{::buybanggood.png?180}}]][[https://sampin.ch/thermistorconnector|{{::buyaliexpress.png?180}}]] | No image yet. | **Thermistors**: If you damage your hot end thermistor, there are two options. SOME A5 prints have a thermistor attached via a short cable to a connector hidden in the black corrugated tubing. Other older A5 printers have the hot end thermistor soldered to the cable that goes to the motherboard. If you have the A5 with the connector, you can buy a replacement thermistor from the Aliexpress link. Otherwise, you will need to use the banggood link and solder a new thermistor in place. You can use any 100k thermistor, that will work - but other suppliers may display very slightly different temperature readings at around 240C. | | | [[https://www.banggood.com/JGAURORA-Temperature-Detece-Suite-Thermistor-with-Wire-For-3D-Printer-p-1278523.html?utm_campaign=481891_facebook&utm_content=1087&p=!P11034818912014032C|{{::buybanggood.png?180}}]][[https://sampin.ch/thermistorconnector|{{::buyaliexpress.png?180}}]] | No image yet. | **Thermistors**: If you damage your hot end thermistor, there are two options. SOME A5 prints have a thermistor attached via a short cable to a connector hidden in the black corrugated tubing. Other older A5 printers have the hot end thermistor soldered to the cable that goes to the motherboard. If you have the A5 with the connector, you can buy a replacement thermistor from the Aliexpress link. Otherwise, you will need to use the banggood link and solder a new thermistor in place. You can use any 100k thermistor, that will work - but other suppliers may display very slightly different temperature readings at around 240C. | |
| | [[https://www.banggood.com/JGAURORA-M6-1_75mm-Filament-Nozzle-Throat-with-Teflon-Tube-for-3D-Printer-p-1278507.html?p=!P11034818912014032C|{{::buybanggood.png?180}}]][[https://sampin.ch/heaterblock|{{::buyaliexpress.png?180}}]] | No image yet. | **Heat Break / Hot End Throat**: If you snap your heat-break/throat, this is the replacement you need. If you can't get the broken part out of the heater block, then make sure you use the Aliexpress link which includes the heater block, or also add the heater block item in the row below. | | | [[https://www.banggood.com/JGAURORA-M6-1_75mm-Filament-Nozzle-Throat-with-Teflon-Tube-for-3D-Printer-p-1278507.html?p=!P11034818912014032C|{{::buybanggood.png?180}}]][[https://sampin.ch/heaterblock|{{::buyaliexpress.png?180}}]] | No image yet. | **Heat Break / Hot End Throat**: If you snap your heat-break/throat, this is the replacement you need. If you can't get the broken part out of the heater block, then make sure you use the Aliexpress link which includes the heater block, or also add the heater block item in the row below. | |
| | [[https://www.banggood.com/JGAURORA-201611_5mm-M6-Aluminum-Heating-Block-for-3D-Printer-p-1286196.html?p=!P11034818912014032C|{{::buybanggood.png?180}}]][[https://sampin.ch/heaterblock|{{::buyaliexpress.png?180}}]] | No image yet. | **Hot End: Heater Block**: If you somehow damage your heater block, this is the replacement you need. Use the aliexpress link if you need the throat/heat-break also.| | | [[https://www.banggood.com/JGAURORA-201611_5mm-M6-Aluminum-Heating-Block-for-3D-Printer-p-1286196.html?p=!P11034818912014032C|{{::buybanggood.png?180}}]][[https://sampin.ch/heaterblock|{{::buyaliexpress.png?180}}]] | No image yet. | **Hot End: Heater Block**: If you somehow damage your heater block, this is the replacement you need. Use the aliexpress link if you need the throat/heat-break also. | |
| | [[https://www.gearbest.com/3d-printer-parts/pp_1465370.html?lkid=14854848|{{::buygearbest.png?180}}]][[https://www.banggood.com/JGAURORA-1_75mm-Filament-0_4mm-Copper-Nozzle-for-3D-Printer-p-1299557.html?utm_campaign=481891_facebook&utm_content=1087&p=!P11034818912014032C|{{::buybanggood.png?180}}]][[https://amzn.to/2w8fOXA|{{::buyamazon.png?180}}]] | No image yet. | **Spare 0.4mm Nozzles**:Spare Nozzles... enough said! The nozzles can be damaged by being scraped on the printer bed, or by printing abrasive filaments. Here are some suitable low cost replacements. Banggood sells original JGAurora A5 replacements, but I have linked some compatible nozzles from Gearbest as well. | | | [[https://www.gearbest.com/3d-printer-parts/pp_1465370.html?lkid=14854848|{{::buygearbest.png?180}}]][[https://www.banggood.com/JGAURORA-1_75mm-Filament-0_4mm-Copper-Nozzle-for-3D-Printer-p-1299557.html?utm_campaign=481891_facebook&utm_content=1087&p=!P11034818912014032C|{{::buybanggood.png?180}}]][[https://amzn.to/2w8fOXA|{{::buyamazon.png?180}}]] | No image yet. | **Spare 0.4mm Nozzles**:Spare Nozzles... enough said! The nozzles can be damaged by being scraped on the printer bed, or by printing abrasive filaments. Here are some suitable low cost replacements. Banggood sells original JGAurora A5 replacements, but I have linked some compatible nozzles from Gearbest as well. | |
| | [[https://www.gearbest.com/3d-printer-parts/pp_437606.html?wid=1433363&lkid=15337340|{{::buygearbest.png?180}}]][[https://www.banggood.com/5M-2GT-6mm-Rubber-Opening-Belt-S2M-GT2-Belt-For-3D-Printer-p-959254.html?utm_campaign=481891_facebook&utm_content=1087&p=!P11034818912014032C|{{::buybanggood.png?180}}]][[https://amzn.to/2L7osep|{{::buyamazon.png?180}}]] | No image yet. | **Timing Belt**:If your timing belt is worn or needs replacement, replacement belts are inexpensive. | | | [[https://www.gearbest.com/3d-printer-parts/pp_437606.html?wid=1433363&lkid=15337340|{{::buygearbest.png?180}}]][[https://www.banggood.com/5M-2GT-6mm-Rubber-Opening-Belt-S2M-GT2-Belt-For-3D-Printer-p-959254.html?utm_campaign=481891_facebook&utm_content=1087&p=!P11034818912014032C|{{::buybanggood.png?180}}]][[https://amzn.to/2L7osep|{{::buyamazon.png?180}}]] | No image yet. | **Timing Belt**:If your timing belt is worn or needs replacement, replacement belts are inexpensive. | |
| | [[https://www.gearbest.com/3d-printer-parts/pp_1465383.html?wid=1433363&lkid=15337284|{{::buygearbest.png?180}}]][[https://www.banggood.com/3D-Printer-A4988-Reprap-Stepping-Stepper-Step-Motor-Driver-Module-p-88765.html?utm_campaign=481891_facebook&utm_content=1087&p=!P11034818912014032C|{{::buybanggood.png?180}}]][[https://amzn.to/2nLEcul|{{::buyamazon.png?180}}]] | No image yet. | **A4988 Stepper Drivers**:If you need to replace your stepper drivers, the stock A4988 stepper drivers are cheap and reliable. | | | [[https://www.gearbest.com/3d-printer-parts/pp_1465383.html?wid=1433363&lkid=15337284|{{::buygearbest.png?180}}]][[https://www.banggood.com/3D-Printer-A4988-Reprap-Stepping-Stepper-Step-Motor-Driver-Module-p-88765.html?utm_campaign=481891_facebook&utm_content=1087&p=!P11034818912014032C|{{::buybanggood.png?180}}]][[https://amzn.to/2nLEcul|{{::buyamazon.png?180}}]] | No image yet. | **A4988 Stepper Drivers**:If you need to replace your stepper drivers, the stock A4988 stepper drivers are cheap and unreliable. | |
| | [[https://www.banggood.com/JGAURORA-21511530mm-24V-350W-Switching-Power-Module-Power-Supply-for-3D-Printer-p-1267748.html?utm_campaign=481891_facebook&utm_content=1087&p=!P11034818912014032C|{{::buybanggood.png?180}}]][[http://s.click.aliexpress.com/e/bLHVT29E|{{::buyaliexpress.png?180}}]][[https://amzn.to/2OKh4Yw|{{::buyamazon.png?180}}]] | No image yet. | **Replacement A5 24V Power Supply**:Original JGAurora A5 350W Power Supply | | | [[https://www.banggood.com/JGAURORA-21511530mm-24V-350W-Switching-Power-Module-Power-Supply-for-3D-Printer-p-1267748.html?utm_campaign=481891_facebook&utm_content=1087&p=!P11034818912014032C|{{::buybanggood.png?180}}]][[http://s.click.aliexpress.com/e/bLHVT29E|{{::buyaliexpress.png?180}}]][[https://amzn.to/2OKh4Yw|{{::buyamazon.png?180}}]] | No image yet. | **Replacement A5 24V Power Supply**:Original JGAurora A5 350W Power Supply | |
| | [[https://amzn.to/2vOHYaP|{{::buyamazon.png?180}}]] | No image yet. | **MeanWell 350W 24V Power Supply**:Premium Quality 24V Power Supply for the A5. | | | [[https://amzn.to/2vOHYaP|{{::buyamazon.png?180}}]][[http://s.click.aliexpress.com/e/cqRBbNuk|{{::buyaliexpress.png?180}}]] | No image yet. | **MeanWell 350W 24V Power Supply**:Premium Quality 24V Power Supply for the A5. | |
| | [[https://www.banggood.com/JGAURORA-M6-1_75mm-Filament-Nozzle-Throat-with-Teflon-Tube-for-3D-Printer-p-1278507.html?utm_campaign=481891_facebook&utm_content=1087&p=!P11034818912014032C|{{::buybanggood.png?180}}]] | No image yet. | **Hot-end Heat Break / Throat**:Original JGAurora A5 Hot-end heat break throat, with PTFE tube. | | | [[https://www.banggood.com/JGAURORA-M6-1_75mm-Filament-Nozzle-Throat-with-Teflon-Tube-for-3D-Printer-p-1278507.html?utm_campaign=481891_facebook&utm_content=1087&p=!P11034818912014032C|{{::buybanggood.png?180}}]] | No image yet. | **Hot-end Heat Break / Throat**:Original JGAurora A5 Hot-end heat break throat, with PTFE tube. | |
| | [[http://s.click.aliexpress.com/e/bFbttftO|{{::buyaliexpress.png?180}}]] | No image yet. | **Hot-end Heater Block**:The heater metal block assembly, along with the heat break and nozzle. | | | [[http://s.click.aliexpress.com/e/bFbttftO|{{::buyaliexpress.png?180}}]] | No image yet. | **Hot-end Heater Block**:The heater metal block assembly, along with the heat break and nozzle. | |
| | [[http://s.click.aliexpress.com/e/TOhQtLa|{{::buyaliexpress.png?180}}]] | No image yet. | **Bowden Connector**:Replacement for Bowden Tube Connector on JGAurora A5 - this is M8 thread, with 1mm fine pitch thread. | | | [[http://s.click.aliexpress.com/e/TOhQtLa|{{::buyaliexpress.png?180}}]] | No image yet. | **Bowden Connector**:Replacement for Bowden Tube Connector on JGAurora A5 - this is M8 thread, with 1mm fine pitch thread. | |
| | [[https://www.banggood.com/Creality-3D-5M-PTFE-Nozzle-Feed-Teflon-Tube-For-3D-Printer-1_75mm-Filament-p-1193862.html?utm_campaign=481891_facebook&utm_content=1087&p=!P11034818912014032C|{{::buybanggood.png?180}}]][[https://amzn.to/2Bnh9iX|{{::buyamazon.png?180}}]] | No image yet. | **Bowden Tubing**:Replacement bowden tubing, made of PTFE (teflon). 4mm external diameter, 2mm internal diameter. | | | [[https://www.banggood.com/Creality-3D-5M-PTFE-Nozzle-Feed-Teflon-Tube-For-3D-Printer-1_75mm-Filament-p-1193862.html?utm_campaign=481891_facebook&utm_content=1087&p=!P11034818912014032C|{{::buybanggood.png?180}}]][[https://amzn.to/2Bnh9iX|{{::buyamazon.png?180}}]] | No image yet. | **Bowden Tubing**:Replacement bowden tubing, made of PTFE (teflon). 4mm external diameter, 2mm internal diameter. | |
| | [[https://www.banggood.com/JGAURORA-303010mm-DC-24V-0_06A-Cooling-Fan-for-3D-Printer-with-Cable-p-1272718.html?utm_campaign=481891_facebook&utm_content=1087&p=!P11034818912014032C|{{::buybanggood.png?180}}]][[http://s.click.aliexpress.com/e/cLJQCwwM|{{::buyaliexpress.png?180}}]] | No image yet. | **24V 30mm Axial Fan**: Original 30mm Fan from JGAurora A5 / A3S (Top fan) | | | [[https://www.banggood.com/JGAURORA-303010mm-DC-24V-0_06A-Cooling-Fan-for-3D-Printer-with-Cable-p-1272718.html?utm_campaign=481891_facebook&utm_content=1087&p=!P11034818912014032C|{{::buybanggood.png?180}}]][[http://s.click.aliexpress.com/e/cLJQCwwM|{{::buyaliexpress.png?180}}]] | No image yet. | **24V 30mm Axial Fan**: Original 30mm Fan from JGAurora A5 / A3S (Top fan) | |
| | [[https://www.banggood.com/JGAURORA-303010mm-Turbo-Cooling-Fan-with-Line-for-3D-Printer-p-1278992.html?utm_campaign=481891_facebook&utm_content=1087&p=!P11034818912014032C|{{::buybanggood.png?180}}]][[http://s.click.aliexpress.com/e/cLJQCwwM|{{::buyaliexpress.png?180}}]] | No image yet. | **24V 30mm Nozzle Blower**: Original 30mm Fan from JGAurora A5 / A3S (Bottom blower fan) | | | [[https://www.banggood.com/JGAURORA-303010mm-Turbo-Cooling-Fan-with-Line-for-3D-Printer-p-1278992.html?utm_campaign=481891_facebook&utm_content=1087&p=!P11034818912014032C|{{::buybanggood.png?180}}]][[http://s.click.aliexpress.com/e/cLJQCwwM|{{::buyaliexpress.png?180}}]] | No image yet. | **24V 30mm Nozzle Blower**: Original 30mm Fan from JGAurora A5 / A3S (Bottom blower fan) | |
| | [[https://www.banggood.com/JGAURORA-48_84248mm-200mNm-Min-Holding-Torque-Stepper-Motor-for-3D-Printer-p-1267751.html?utm_campaign=481891_facebook&utm_content=1087&p=!P11034818912014032C&cur_warehouse=CN|{{::buybanggood.png?180}}]] | No image yet. | JGAURORA® 200mN·m Min Holding **Torque Stepper Motor** for A3S/A5 3D Printer | | | [[https://www.banggood.com/JGAURORA-48_84248mm-200mNm-Min-Holding-Torque-Stepper-Motor-for-3D-Printer-p-1267751.html?utm_campaign=481891_facebook&utm_content=1087&p=!P11034818912014032C&cur_warehouse=CN|{{::buybanggood.png?180}}]] | No image yet. | JGAURORA® 200mN·m Min Holding **Torque Stepper Motor** for A3S/A5 3D Printer | |
| //**More spare parts for the A5 are listed [[a5:spare-parts|here]].**// | //**More spare parts for the A5 are listed [[a5:spare-parts|here]].**// |
| ====== OctoPrint: Raspberry Pi ====== | ====== OctoPrint: Raspberry Pi ====== |
