Differences

This shows you the differences between two versions of the page.

--- a5:printing-profiles [2018/05/04 22:56] – [Copying settings from JGCreat to Cura] samuelpinches
+++ a5:printing-profiles [2019/04/30 08:00] – S3D Profiles cs2000
@@ Line 12: / Line 12: @@
 ==== Copying settings from JGCreat to Cura ====
-Want to use the latest Ultimaker Cura.. Just copy your JGCreate Profiles across by simply doing the following...
+If you want to use Cura, but keep the JGCreat printing profiles, then follow the following steps to copy across the profiles:
-. Make sure both are installed but not running. Cura can be downloaded free from https://ultimaker.com/en/products/ultimaker-cura-software
+  - Make sure both [[:jgcreat|JGCreat]] and [[https://ultimaker.com/en/products/cura-software/list|latest version of Cura]] are installed, but that both are closed and not running.
-, In File Explorer, navigate to C:\Program Files\JGcreat 2.5.0\resources\definitions and copy all the files in there (all end in json)
+  - In File Explorer, navigate to C:\Program Files\JGcreat 2.5.0\resources\definitions
-. In File Explorer navigate to C:\Program Files\Ultimaker Cura 3.1\resources\definitions and paste the copied files.
+  - Copy all the files in there. These files all end in ".json".
-. Start Cura up and click settings.. printer.. add printer.. choose your JG printer from the menu which should now be showing like the below image.. Easy
+  - In File Explorer navigate to C:\Program Files\Ultimaker Cura 3.1\resources\definitions
-**//Credit: Steve Wagg//**
+  - Paste the copied files.
-{{:a5:jgcreat_to_cura.jpg?nolink |}}
+  - Start Cura up and click settings --> printer --> add printer
+  - Choose your JGAurora printer from the menu (should look like image below - click to enlarge).
+  - Easy :-)
+Thanks to Steve Wagg for this tip!
+{{ :a5:jgcreat_to_cura.jpg |}}
 ====Starting & Ending GCode ====
@@ Line 50: / Line 55: @@
 You can setup IdeaMaker with the A5 printer, by using these machine settings [[https://github.com/ceakins/3d-Printer-Profiles/blob/master/ideaMaker/JGAuora-A5-Printer-Settings.png|here]]. More printing settings can be downloaded [[https://github.com/ceakins/3d-Printer-Profiles/tree/master/ideaMaker/Material-Templates/JGAuora/A-5|here]].
 Source: Charles Eakins @ https://github.com/ceakins/3d-Printer-Profiles/tree/master/ideaMaker
+==== Simplify3D====
+Simplify3D is perhaps one of the best paid slicers out there, i would recommend setting your machine up yourself to learn the software, but if you want to just get printing, grab my FFF profiles from the link below. [[https://github.com/cs2000/JGAurora-A5-S3D-Profiles|FFF Profiles Link]].
+Source: Cs2000

The Unofficial JGMaker (& JGAurora) Wiki

User Tools

Site Tools

Differences