a5:faulty-temperature-readings

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
a5:faulty-temperature-readings [2018/07/09 17:30]
samuelpinches [Fixing the problem]
a5:faulty-temperature-readings [2019/02/18 20:53] (current)
samuelpinches [Fixing the problem]
Line 48: Line 48:
  
  
-----+
   //   //
   // Temperature Sensors   // Temperature Sensors
Line 56: Line 56:
   #define TEMP_BED_PIN       14   // Analog Input   #define TEMP_BED_PIN       14   // Analog Input
      
----- 
- 
 All you need to do, is swap the TEMP_1_PIN number, for the number of the broken port. Then, reflash the firmware. Hopefully now you will have a correct temperature measurement displayed on your printer! All you need to do, is swap the TEMP_1_PIN number, for the number of the broken port. Then, reflash the firmware. Hopefully now you will have a correct temperature measurement displayed on your printer!
  
 +For more info on the thermal safety systems in the Marlin Firmware, see [[/thermal-runaway|this page]].
  
a5/faulty-temperature-readings.1531121449.txt.gz ยท Last modified: 2018/07/09 17:30 by samuelpinches