a5:faq

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision
Previous revision
a5:faq [2019/02/25 13:01] โ€“ [Problem: The printer will not move, or will only move in one direction.] samuelpinchesa5:faq [2020/12/25 02:13] (current) โ€“ external edit 127.0.0.1
Line 33: Line 33:
   * You must "Home" all the printer axis, before trying to move.    * You must "Home" all the printer axis, before trying to move. 
   * You may also want to check you have [[stepper-drivers|tuned your stepper drivers]].   * You may also want to check you have [[stepper-drivers|tuned your stepper drivers]].
-  * Check for errors in [[pronterface]].+  * Check for errors in [[/pronterface|pronterface]].
  
 ---- ----
Line 62: Line 62:
   * Faulty temperature readings? Check [[a5:faulty-temperature-readings|this page too]].   * Faulty temperature readings? Check [[a5:faulty-temperature-readings|this page too]].
   * Bed not heating? [[a5:drag-chain-cable-damage|Check if your bed cable is damaged inside the drag chain.]]   * Bed not heating? [[a5:drag-chain-cable-damage|Check if your bed cable is damaged inside the drag chain.]]
 +  * Bed still not heating? [[:burned-bed-connectors|Check the Bed connector on the side of the bed is not damaged.]]
  
 ---- ----
a5/faq.1551060116.txt.gz ยท Last modified: 2020/12/25 02:13 (external edit)