====== Problem with prints squished in the corner ======
===Problem===
Some people have been encountering problems with their prints coming out squished into the corner of the bed, rather than starting at the centre of the bed.

===Cause===
The printer coordinate system for a cartesian printer (e.g. not a polar delta printer) starts with x,y = 0,0 at the corner of the bed. You need to tell your slicer that this is the case, so that the correct GCode files are produced.

===Solution===
For example, in Cura, you need to go into the machine settings, and uncheck the box for "Machine centre 0,0". See below:
{{ ::machine-centre.png?direct |}}